How Easy is it to Maintain a Floor Coated with EPIC Water Based Urethane?

EPIC® High-Performance Floor Finish is a durable and high-performance coating that provides excellent protection for commercial floors. EPIC® High-Performance Floor Finish is an excellent replacement for acrylic wax that saves a tremendous amount of money, time, labor, energy, and materials on floorcare. One coat lasts 3-5 years, plus it requires less labor and product! To ensure that your floor maintains its quality and appearance over time, it's important to follow a regular maintenance schedule. Here are some steps to help you maintain a floor coated with EPIC water-based floor finish:

Sweep and Vacuum Regularly

Sweeping and vacuuming your floor on a regular basis is essential to prevent dirt, dust, and debris from scratching the finish. Use a soft-bristled broom or a vacuum cleaner with a soft brush attachment to remove loose dirt and debris. Make sure to remove all debris from corners and hard-to-reach areas.

Damp Mop as Needed

Damp mopping your floor regularly helps to remove dirt and grime that can build up over time. Use a clean, damp mop and a pH-neutral cleaner that is safe for use on water-based finishes. Avoid using ammonia or abrasive cleaners, as these can damage the finish. Be sure to rinse the mop frequently to avoid spreading dirt and grime around the floor.

Address Spills Promptly

If a spill occurs on your floor, clean it up immediately to prevent it from damaging the finish. Use a clean, damp cloth to wipe up the spill, then follow up with a damp mop and cleaner as needed.

Use Entrance Mats

Placing entrance mats at the entryways to your building helps to prevent dirt, dust, and debris from being tracked onto the floor. This reduces the amount of cleaning required and helps to preserve the finish.

Refinish as Needed

Over time, the finish on your floor may become worn or scratched. If this occurs, you may need to refinish the floor to restore its appearance and protect it from further damage. Consult with a professional floor maintenance company to determine the best course of action for your specific flooring material.

Avoid Excessive Water

Excessive water can damage the finish on your floor, so it's important to avoid using too much water when cleaning. Use a damp mop rather than a soaking wet mop and avoid leaving standing water on the floor.

By following these maintenance tips, you can help to ensure that your floor coated with EPIC water-based floor finish remains in top condition for years to come. Regular cleaning and prompt attention to spills, along with the use of entrance mats and avoiding excessive water, can all help to protect your investment and keep your floors looking great.

Learn more about EPIC® High-Performance Floor Finish and how you can revolutionize your floor care routine! Resource Savings - UDT (ultradt.com)

Patient Room - Traditional acrylic wax is soft, discolors, and dulls quickly. EPIC’s High Performance floor finish is the perfect solution to a long-lasting beautiful floor!

Case Study - St. Cloud Hospital, Center for Surgical Care, PACU

OVERVIEW

In partnership with Ultra Durable Technologies, Facility Health Solutions provided CentraCare - St. Cloud Hospital with a low-maintenance and economical alternative to traditional acrylic floor care systems. 

EPIC® High-Performance Floor Finish was developed by Ultra Durable Technologies to completely replace the ongoing and costly maintenance requirements associated with traditional acrylic floor care programs. One thin coat of EPIC® lasts an average of 3-5 years in high traffic environments without any buffing or recoating.  The labor savings allow janitorial staff to focus on other important cleaning and sanitizing duties that are increasingly important in medical facilities. In addition, the use of EPIC® High-Performance Floor Finish saves a tremendous amount of water, electricity, and chemicals that can have a negative impact on patients, visitors, staff, and the environment. Finally, all floor care work requires staff and patient displacement, all of which is a disturbance to daily operations.

THE TRIAL

CentraCare - St. Cloud Hospital, located in St. Cloud, Minnesota, conducted an initial trial of EPIC® High-Performance Floor Finish June of 2013.  The goal was to monitor how long one coat of EPIC® High-Performance Floor Finish would outperform the current acrylic floor finish in the PACU (Post Anesthesia Care Unit).  The area is high traffic and includes recovery bays, hallways, nurse stations, and restrooms.  The initial EPIC® High-Performance Floor Finish trial was led by Molly Voigt, Director of Environmental Services.  Molly and her team are responsible for 1.5 million square feet of flooring across the St. Cloud Hospital campus. 

The PACU floor was brand new in 2013. The acrylic floor care program that was previously in place at CentraCare, would have required a large amount of labor each year.  Due to the continuous activity and long operating hours in this department, Molly and her team knew these floors would be a challenge to maintain. The decision was made to apply EPIC® to the brand-new flooring before opening the area to staff and patients.

TRIAL OUTCOME

As of April 2021, almost eight years after the single coat of EPIC® High-Performance Floor Finish was applied, the floors still look great.  The gloss is still high and there has been no buffing, striping, or recoating.  The only maintenance simply involves dust mopping with a microfiber mop in smaller areas and using auto scrubbers in larger areas and halls. Beyond the financial savings, when compared to the expense of the old acrylic wax program, St. Cloud Hospital has also experienced less down time resulting in less patient and staff disruption.

St. Cloud Hospital Post-Anesthesia Care Unit - After just one application of EPIC® High-Performance Floor Finish. Over eight years without any stripping or buffing!