The Difference is Clear - EPIC® High-Performance Floor Finish vs Traditional Acrylic Floor Wax!
When it comes to keeping your floors looking great, there are a lot of options out there. But not all floor finishes are created equal. In fact, traditional acrylic floor wax is often inferior to EPIC® High-Performance Floor Finish in several ways.
First and foremost, traditional acrylic floor wax is simply not as durable as other types of floor finishes. Because it is a relatively soft material, it can be easily scratched or scuffed, which can cause it to lose its shine and become discolored. This is especially true in high-traffic areas, like hallways or entryways, where foot traffic can quickly wear down the wax. EPIC® High-Performance Floor Finish is designed to be incredibly durable. It's specifically formulated to resist scuffs, scratches, and other damage that can occur from foot traffic, spills, and other sources. That means that you can expect your floors to look great for much longer when you use EPIC compared to traditional acrylic floor wax.
EPIC® High-Performance Floor Finish is also designed to be extremely low maintenance. Unlike traditional wax, which requires regular stripping, buffing, and recoating, EPIC can be simply cleaned with microfiber mop and water to maintain a shine that will last for several years. This not only saves time and money on maintenance, but it also reduces the amount of chemicals and waste that go into maintaining your floors.
In addition to being more durable and easier to maintain, EPIC® High-Performance Floor Finish is also more environmentally friendly than traditional wax. It's made with no volatile organic compounds (VOCs), which are harmful chemicals that can be released into the air during the application and curing process. By using EPIC, you can help reduce your environmental impact without sacrificing the quality or appearance of your floors.
Another advantage of EPIC® High-Performance Floor Finish is that it can be applied to a wider range of surfaces than traditional wax. While wax is typically used only on floors like VCT or sheet vinyl, EPIC can also be used on ceramic tile and grout, terrazzo, stone, and more. This versatility makes it a more flexible and cost-effective solution for a wide range of applications.
Overall, there are many reasons why EPIC® High-Performance Floor Finish is a superior choice to traditional acrylic floor wax. Its durability, low-maintenance, environmental friendliness, and versatility make it a smart investment for anyone looking to keep their floors looking great for years to come.
This is an untouched photo of a test floor in a breakroom at a local University. The tiles in top 1/2 of the picture have been coated with EPIC® High-Performance Floor Finish. The bottom tiles have been coated with traditional acrylic wax. Notice, that after just 6 months, the traditional wax is dull, dirty, and discolored and the EPIC coated section is still clear, bright, and shiny despite it receiving the same amount of wear and tear!
How Easy is it to Maintain a Floor Coated with EPIC Water Based Urethane?
EPIC® High-Performance Floor Finish is a durable and high-performance coating that provides excellent protection for commercial floors. EPIC® High-Performance Floor Finish is an excellent replacement for acrylic wax that saves a tremendous amount of money, time, labor, energy, and materials on floorcare. One coat lasts 3-5 years, plus it requires less labor and product! To ensure that your floor maintains its quality and appearance over time, it's important to follow a regular maintenance schedule. Here are some steps to help you maintain a floor coated with EPIC water-based floor finish:
Sweep and Vacuum Regularly
Sweeping and vacuuming your floor on a regular basis is essential to prevent dirt, dust, and debris from scratching the finish. Use a soft-bristled broom or a vacuum cleaner with a soft brush attachment to remove loose dirt and debris. Make sure to remove all debris from corners and hard-to-reach areas.
Damp Mop as Needed
Damp mopping your floor regularly helps to remove dirt and grime that can build up over time. Use a clean, damp mop and a pH-neutral cleaner that is safe for use on water-based finishes. Avoid using ammonia or abrasive cleaners, as these can damage the finish. Be sure to rinse the mop frequently to avoid spreading dirt and grime around the floor.
Address Spills Promptly
If a spill occurs on your floor, clean it up immediately to prevent it from damaging the finish. Use a clean, damp cloth to wipe up the spill, then follow up with a damp mop and cleaner as needed.
Use Entrance Mats
Placing entrance mats at the entryways to your building helps to prevent dirt, dust, and debris from being tracked onto the floor. This reduces the amount of cleaning required and helps to preserve the finish.
Refinish as Needed
Over time, the finish on your floor may become worn or scratched. If this occurs, you may need to refinish the floor to restore its appearance and protect it from further damage. Consult with a professional floor maintenance company to determine the best course of action for your specific flooring material.
Avoid Excessive Water
Excessive water can damage the finish on your floor, so it's important to avoid using too much water when cleaning. Use a damp mop rather than a soaking wet mop and avoid leaving standing water on the floor.
By following these maintenance tips, you can help to ensure that your floor coated with EPIC water-based floor finish remains in top condition for years to come. Regular cleaning and prompt attention to spills, along with the use of entrance mats and avoiding excessive water, can all help to protect your investment and keep your floors looking great.
Learn more about EPIC® High-Performance Floor Finish and how you can revolutionize your floor care routine! Resource Savings - UDT (ultradt.com)
Patient Room - Traditional acrylic wax is soft, discolors, and dulls quickly. EPIC’s High Performance floor finish is the perfect solution to a long-lasting beautiful floor!
Case Study - St. Cloud Hospital, Center for Surgical Care, PACU
OVERVIEW
In partnership with Ultra Durable Technologies, Facility Health Solutions provided CentraCare - St. Cloud Hospital with a low-maintenance and economical alternative to traditional acrylic floor care systems.
EPIC® High-Performance Floor Finish was developed by Ultra Durable Technologies to completely replace the ongoing and costly maintenance requirements associated with traditional acrylic floor care programs. One thin coat of EPIC® lasts an average of 3-5 years in high traffic environments without any buffing or recoating. The labor savings allow janitorial staff to focus on other important cleaning and sanitizing duties that are increasingly important in medical facilities. In addition, the use of EPIC® High-Performance Floor Finish saves a tremendous amount of water, electricity, and chemicals that can have a negative impact on patients, visitors, staff, and the environment. Finally, all floor care work requires staff and patient displacement, all of which is a disturbance to daily operations.
THE TRIAL
CentraCare - St. Cloud Hospital, located in St. Cloud, Minnesota, conducted an initial trial of EPIC® High-Performance Floor Finish June of 2013. The goal was to monitor how long one coat of EPIC® High-Performance Floor Finish would outperform the current acrylic floor finish in the PACU (Post Anesthesia Care Unit). The area is high traffic and includes recovery bays, hallways, nurse stations, and restrooms. The initial EPIC® High-Performance Floor Finish trial was led by Molly Voigt, Director of Environmental Services. Molly and her team are responsible for 1.5 million square feet of flooring across the St. Cloud Hospital campus.
The PACU floor was brand new in 2013. The acrylic floor care program that was previously in place at CentraCare, would have required a large amount of labor each year. Due to the continuous activity and long operating hours in this department, Molly and her team knew these floors would be a challenge to maintain. The decision was made to apply EPIC® to the brand-new flooring before opening the area to staff and patients.
TRIAL OUTCOME
As of April 2021, almost eight years after the single coat of EPIC® High-Performance Floor Finish was applied, the floors still look great. The gloss is still high and there has been no buffing, striping, or recoating. The only maintenance simply involves dust mopping with a microfiber mop in smaller areas and using auto scrubbers in larger areas and halls. Beyond the financial savings, when compared to the expense of the old acrylic wax program, St. Cloud Hospital has also experienced less down time resulting in less patient and staff disruption.
St. Cloud Hospital Post-Anesthesia Care Unit - After just one application of EPIC® High-Performance Floor Finish. Over eight years without any stripping or buffing!